I have been top posting in some posts and not in compliance with the
guidelines. Thank you for pointing that out , while I cannot say I will
never do so again I will strive not to do so.My apologies, gentlemen!Again
any suggestions for a yEnc decoder that works with Outlook Express either
freeware or not too expensive would be nice and welcomed.
Hub

Very kind words. Thank you.

Dave

...
> Very kind words. Thank you.
>
> Dave
You are welcome!
Hub

"Hub Plott III" > wrote in message
...
>I have been top posting in some posts and not in compliance with the
>guidelines. Thank you for pointing that out , while I cannot say I will
>never do so again I will strive not to do so.My apologies, gentlemen!Again
>any suggestions for a yEnc decoder that works with Outlook Express either
>freeware or not too expensive would be nice and welcomed.
> Hub

I posted this several days ago, http://www.yproxy.com/45fa82be/. It's
for the free versions of yProxy. Parent directory: http://www.yproxy.com.
Works on-the-fly but must run in the backgound using 3.5MB of RAM, not a
problem on my 2 GB RAM homebuilt system. Really, shouldn't be a problem for
any decent system. I'm using v1.3. The link to
http://www.yproxy.com/45fa82be/ is hard to find on the site so if you're
interested don't lose it.

--
Tom

Very staged as well
"Dave LaCourse" > wrote in message
...
> Very kind words. Thank you.
>
> Dave
>
>

Not staged,Glenn I actually meant it! By the way were you ever able to
obtain the Wirraway cockpit photos you and I spoke of last year?

Thanks,another poster sent me to Fidolook and it is working fine! I will
save the addy for others!
"octothorpe" > wrote in message
news:VHWui.20621$ug3.5749@trnddc06...
>
> "Hub Plott III" > wrote in message
> ...
>>I have been top posting in some posts and not in compliance with the
>>guidelines. Thank you for pointing that out , while I cannot say I will
>>never do so again I will strive not to do so.My apologies, gentlemen!Again
>>any suggestions for a yEnc decoder that works with Outlook Express either
>>freeware or not too expensive would be nice and welcomed.
>> Hub
>
> I posted this several days ago, http://www.yproxy.com/45fa82be/. It's
> for the free versions of yProxy. Parent directory: http://www.yproxy.com.
> Works on-the-fly but must run in the backgound using 3.5MB of RAM, not a
> problem on my 2 GB RAM homebuilt system. Really, shouldn't be a problem
> for any decent system. I'm using v1.3. The link to
> http://www.yproxy.com/45fa82be/ is hard to find on the site so if you're
> interested don't lose it.
>
> --
> Tom
>

"Hub Plott III" > wrote in message
...
> Not staged,Glenn I actually meant it! By the way were you ever able to
> obtain the Wirraway cockpit photos you and I spoke of last year?
Can you email me again.

"Hub Plott III" > wrote in message
...
> Thanks,another poster sent me to Fidolook and it is working fine! I will
> save the addy for others!
> "octothorpe" > wrote in message
> news:VHWui.20621$ug3.5749@trnddc06...
>>
>> "Hub Plott III" > wrote in message
>> ...
>>>I have been top posting in some posts and not in compliance with the
>>>guidelines. Thank you for pointing that out , while I cannot say I will
>>>never do so again I will strive not to do so.My apologies,
>>>gentlemen!Again any suggestions for a yEnc decoder that works with
>>>Outlook Express either freeware or not too expensive would be nice and
>>>welcomed.
>>> Hub
>>
>> I posted this several days ago, http://www.yproxy.com/45fa82be/. It's
>> for the free versions of yProxy. Parent directory: http://www.yproxy.com.
>> Works on-the-fly but must run in the backgound using 3.5MB of RAM, not a
>> problem on my 2 GB RAM homebuilt system. Really, shouldn't be a problem
>> for any decent system. I'm using v1.3. The link to
>> http://www.yproxy.com/45fa82be/ is hard to find on the site so if you're
>> interested don't lose it.
>>
Mmm, the Fidolook extension for OE seems to have more going for it than
only yEnc support. I'll have to give it a try.

--
Tom

"Hub Plott III" > wrote in message
...
>I have been top posting in some posts and not in compliance with the
> guidelines. Thank you for pointing that out , while I cannot say I will
> never do so again I will strive not to do so.My apologies, gentlemen!Again
> any suggestions for a yEnc decoder that works with Outlook Express either
> freeware or not too expensive would be nice and welcomed.
> Hub


I've been using yProxy for years with perfect success.
Here is a copy for you and anyone else that wants it. It DECODES ONLY,
and will not post your stuff in yEnc. That way you can see the pics, but
not contribute to the problem.


Luke